Metrologic MS7120 Orbit Guía de usuario descargar pdf (Pagina 10)

INTRODUCTION INTRODUCTION

Mounting Specifications

Optional Wall/Counter Mount

Item Description Qty.

a. Locking Plate, PN 50-50302 1

b. Base Cover, PN 50-50301 1

c. #7 x 1.00" Wood Screw, PN 18-18013 3

d. M3 x 8 mm Flathead Screw, PN 18-18004 4

Figure 4. Kit Components

1. Drill three #39 pilot holes.

Note the position Orbit will rest

(see Figure 5). Use the dimensions

provided in Figure 5 or the locking

plate as a template to drill three

#39 pilot holes in the mounting

surface.

Figure 5

2. Attach the locking plate to the wall/counter.

Secure the locking plate to the counter/wall with the three #7 x 1.00" wood

screws provided (see Figure 6).

3. Attach the base plate to the Orbit.

Secure the base cover to the bottom of Orbit using the four M3 x 8 mm

screws provided (see Figure 7).

4. Mount

Orbit to the locking plate.

Hold Orbit 90° clockwise from the desired position then lower it over the

locking plate until it sits flush to the countertop. Twist Orbit counter

clockwise 90° to lock the scanner in place (see Figure 8).

Figure 8

Figure 7

Figure 6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Sin comentarios

Metrologic MS7120 Orbit Guía de usuario Pagina 10