Metrologic TECH 10 Guía de usuario descargar pdf (Pagina 7)

Parts of the Scanner

Becoming familiar with the features of the TECH 10 scanner will help when

operating the scanner. The following illustration and list explain the pertinent

parts.

1 Green and Red LEDs When the green LED is on, this shows

that the unit is receiving power and the

laser is on. When the red LED flashes on,

the scanner has read a bar code

successfully. When the red light turns off,

communication to the host is complete.

2 Laser Output Window Laser light is emitted from this aperture.

3 Mil spec Connector This is a 19-pin male Mil spec connector.

It is used to connect the scanner to a host

device by using a communication cable

with a female Mil spec connector. The

communication cable may include a

power trans-former or it may be designed

to draw power directly from the host

device. The standard TECH 10 only

contains one connector. If the scanner is

being used with the MX001 box, then

there will be two Mil spec connectors on

the unit.

1 2 3 4 5 6 7 8 9 10 11 12 ... 20 21

Sin comentarios

Metrologic TECH 10 Guía de usuario Pagina 7