Metrologic IS1000 Series Guía de usuario Pagina 177

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 198
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 176
Appendix
I
Barcode
Setting
171
Length Qualification
Because of the weak structure of the 2 of 5 barcodes, it is possible to
make a "short scan" error. To prevent the "short scan" error, user can
define the "Length Qualification" settings to insure that the correct code
is read by qualifying the allowable code length. The barcode can be
qualified by "Fixed Length" or "Max/Min Length". If "Fixed Length" is
selected, up to 2 fixed lengths can be specified. If "Max/Min Length" is
selected, the maximum length and the minimum length must be specified.
The target terminal will only accept those barcodes with lengths that fall
between max/min lengths specified.
Codabar
Start / Stop Character
User can select no start/stop characters or one of the four different
start/stop character pairs, i.e., abcd/abcd, abcd/tn*e, ABCD/ABCD, and
ABCD/TN*E, to be included in the data being transmitted.
UPCE
Convert to UPCA
If this parameter is enabled, the read UPCE barcode will be expanded into
UPCA, and the next processing will follow the parameters configured for
UPCA.
Transmit System Number
If this parameter is enabled, the system number will be included in the
data being transmitted.
Transmit Checksum
If this parameter is enabled, the checksum character will be included in
the data being transmitted.
EAN8
Convert to EAN13
If this parameter is enabled, the EAN 8 read will be expanded into EAN
13, and the next processing will follow the parameters configured for
EAN 13.
Transmit Checksum
If this parameter is enabled, the checksum character will be included in
the data being transmitted.
Vista de pagina 176
1 2 ... 172 173 174 175 176 177 178 179 180 181 182 ... 197 198

Comentarios a estos manuales

Sin comentarios